LAZER Z S-SERIES EFI

With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Mower Deck Widths: 60″ 72″

Equipment Specs

Blade Spindles	No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
Drive Tires	24 x 12-12, 4 ply Turf Master®
Cup Holder	Standard
Tractor Frame	Unibody, welded, heavy-duty 1.5″ x 3″ tubular steel.
Steering Control	Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires	13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake	Lever-actuated disc brake.
Seat	Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical	12-volt battery with 30-amp alternator.
Onboard Intelligence	RED Technology
Engine Brand	Kawasaki®
Engine Model	FX850V
Engine Displacement	852
Engine Series	V-Twin EFI
Engine Type	Electronic Fuel Injected
Engine Speed	3,750 RPM
Air Filter	Heavy-duty canister air filtration system
Fuel Type	Gas EFI
Fuel Capacity	12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator	Yes – electronic Sender
Drive	Hydro-Drive
Drive Description	Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed	Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant	No
Deck Lift	Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package	Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS	2-post foldable ROPS standard with seat belt and latch.
PTO Engagement	MagStop electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release	Allows unit movement without engine running.
Casters	.50″ thick caster yoke arms.
Model Description	Lazer Z S-Series 29.5 HP* Kaw EFI EGov EKA850 w/60″ UltraCut Series 4 Deck, RED, Susp Seat & Wide Semi-Pneum
Width / Cutting Deck	52″, 60″ and 72″
Deck Style	Floating Deck
Deck Style Description	Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction	10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed	Approximately 18,500 fpm.
Cutting Heights	1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s seat.
Blades	3 Blades at 20.50″ Length
Width	72.8 in. (184.9 cm)
Length	83.1 in. (211.1 cm)
Height	70 in. (177.8 cm)

LAZER Z S-SERIES EFI

Call for Pricing

Similar Products

TURF TRACER X-SERIES EFI

NAVIGATOR EFI

LAZER Z X-SERIES EFI